Mytek-digital Protools HD DIO Card (ver. 1.1 / Oct 2010) Instrukcja Użytkownika Pobierz pdf (Strona 19)

Mytek Protools-HD DIO Card – User Manual

Typical Configurations

Single 8x192 ADDA converter

1. Connect the 8X192 ADDA (through Primary Port) to the

Pro Tools interface card in a computer.

2. Turn on the computer and converter.

3. Set the converter to work with internal clock.

✔ EXT LED shouldn’t be lit.

✗ If LED is lit, press and hold EXT CLOCK SOURCE

button.

4. Launch the Pro Tools application.

5. Open Setup > Hardware Setup and check:

✔ Is the 8X192 ADDA Mytek Digital converter

properly detected as 192 I/O?

✔ Are input and output signals assigned in the Input

and Output tab?

✗ If not, close the Pro Tools application, turn off the

converter and check connection between the HD-

DIO card and the computer.

Setup > Hardware Setup

User Manual ver. 1.1 / oct 2010 www.mytekdigital.com Page: 19 / 29

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 28 29

Brak uwag

Mytek-digital Protools HD DIO Card (ver. 1.1 / Oct 2010) Instrukcja Użytkownika Strona 19